Improve your running with high intensity hill repeats

SuuntoRunMay 07 2019

Hill repeats are the best and safest form of speed work for endurance athletes. In my 10 years of coaching triathletes and runners, I’ve used hill repeats to train high school sprinters to run 49 seconds for the 400m dash, ITU athletes to run under 16 minutes for an off-the-bike 5K, and IRONMAN athletes to run sub-three-hour marathons. We do hills and drills all year, almost every week.

As a coach of age group world and national champions, I have a firm belief that an athlete should always be between eight and 12 weeks away from an exceptional performance. Which means you should always work on speed development. If you drift too far away from speed work, you will see a plateau in performance and potentially injury.

Why are hills so important?

1. They build your strength

If the intensity is correct, the muscle recruitment is at its highest level, helping you increase your distance per step. Developing this muscular strength is critical for long-term health and development. Hill repeats are also the best, most specific form of strength training a runner can do.

2. They improve your speed

Hills are the best form of plyometrics you can do. If you want to run faster, you have to develop an elastic, responsive stride. If you feel like you stomp the ground, this is a great sign that your stride needs improvement. The ability to use the ground’s energy to become more elastic is critical for success and prevents injury.

3. They improve your coordination

Do you not feel comfortable or coordinated when you try and run fast? I’ve worked with many ITU athletes who grew up swimming but had very little running background. They benefitted greatly from hill sprints because it taught them proper running form and speed very quickly.

Now that you’re ready to head into the hills, here are some parameters to keep in mind:

Progress slowly

When you start doing hill repeats, you want to gradually progress from a short, fast sprint to a longer one so as to give your body enough time to warm up and get accustomed to the coordination needed. Always start short. Begin with a hill sprint that takes you less than 10 seconds to complete, then gradually work up to one that takes you roughly 30 seconds. Finish your workout with hill sprints that take between 40 and 60 seconds. If you’re new to hill sprints, or you are injured, then stick to the shorter duration sprints and don’t progress until you feel ready. I recommend five to six repetitions of each length of repeat.

Focus on intensity

The intensity is critical. To make hill repeats effective you need to go very hard. In fact, when doing your eight to 10-second hill repeats, you should be going at maximum effort. If you don’t go hard enough, you’re wasting your time. As the hills progress in length, the intensity doesn’t change much. When you graduate to 40 to 60-second hill repeats, they become incredibly challenging. Your legs will flood with lactate and you will experience a high level of fatigue.

Learn the proper frequency

This depends on your physiology and injury background; not all athletes are treated the same. We do a Run Profile Test with each athlete to show us their technical flaws and their physiology. We also need to know their injury background. If an athlete is frequently injured, they will learn to love 10-second hill repeats.

The Run Profile Test includes a 100m sprint, 1 mile, and 400m effort (in this order). As coaches, we watch for technical flaws in your stride, your elasticity levels, and the differences in your speed versus aerobic properties. If we’re working with a remote athlete we have their training partner video them at certain moments in each repetition. If the athlete scores well on the speed portion, we train them differently than someone who scores low. Every athlete is different.

Add run drills

Run drills are important and shouldn’t be avoided. However, if you think only performing run drills will make you a faster and healthy runner, you’re wrong. Drills teach you how to feel your stride at certain points and increase mobility. In a hill repeat session, we do them before entering each repetition. We perform a specific drill, for example butt kicks, for 10 meters or 10 seconds, then explode into a maximum-effort 10-second hill sprint from a standing start. The objective of the drill is to keep the athlete engaged in what they should be focusing on during the hill repeat. Some of the drills we use include slow marches, butt kicks, high knees, ankle pops, a skips and bounding.

There are many common mistakes that I see runners make while doing hill repeats. The most common include:

1. Not enough rest between repeats

Remember, hills are meant to be educational and not purely for conditioning. You are expected to go maximum effort or close to it. If you don’t allow enough rest, by the third repeat the intensity slips and you’ve lost the benefit. You should allow full recovery between each hill.

2. Skipping the short repeats

Don’t skip the 10-second hill efforts and go straight to the 30-second efforts. When you begin training, the stress should first come from the frequency and volume set for the athlete. We start with short hill repeats to not overload the athlete too much too early.

3. Not going hard enough

The goal is maximum muscle recruitment. You have to achieve maximum recruitment at 10 seconds before you can at 30 seconds. The short hill sprints are what keep you healthy, they lay the foundation for the year. Even if you have a long hill, use that long hill to do short repeats if that’s the amount of time you can go at maximum effort.

4. Poor hill gradient

You never want to sacrifice your posture for an overly steep hill. On the other hand, a hill not steep enough won’t provide you with the resistance needed to execute the workout. A good rule of thumb is a hill no less than 5 percent and no greater than 10 percent. How steep you go depends on how well you can keep a good, natural running position while still being able to work at a maximum effort.

Test out what these hill repeats can do for you. Resist the urge to accelerate the progression too quickly. I can almost guarantee you will feel faster and more coordinated in your upcoming races.

This article by coach Steven Brandes was originally published on trainingpeaks.com. You can learn more about coach Brandes here.

TrainingPeaks provides you in-depth analysis, planning tools and coaching services to help you reach your goal. Track your workouts with your Suunto watch. Afterwards analyze your heart rate, power, pace and other data with TrainingPeaks on the web or in mobile and progress towards your goals.

おすすめのSuunto製品

あなたへのおすすめ

Suunto Race S vs Race 2: Size, Weight, and Battery Life Compared

Suunto Race SとRace 2を比較。サイズ・重さ・バッテリーで選ぶならどっち?

Suuntoのスポーツウォッチを検討している人にとって、迷いやすいのが「Suunto Race S」と「Suunto Race 2」の違いです。 どちらもAMOLEDディスプレイ、オフラインマップ、115以上のスポーツモード、トレーニング分析機能を備えた、ランニングやトレイルランニング、レース、日々のトレーニングに活用できる高性能モデルです。Suunto Race Sは「小さく、軽く、日常に...
Suunto Vertical vs. Vertical 2: Key Differences Explained

Suunto Vertical vs Vertical 2|どちらを選ぶべき?5つの違いを徹底比較

「Suunto Verticalを買おうと思っていたら、Vertical 2が出ていた」「初代とどこが変わったのか、値段差に見合う進化があるのか知りたい」——そんな疑問を持つ方に向けて、この記事では2モデルの違いを5つのポイントに絞って整理します。 どちらを選ぶべきかの判断基準も最後に明確にまとめていますので、ぜひ最後まで読んでみてください。 Suunto Vertical と Vertic...
How to play music on a running watch | Run without your phone with Suunto Run × Spark

ランニングウォッチで音楽再生する方法|スマホなしで走れるSuunto Run × Sparkの使い方

ランニング中に音楽を聴きたいけれど、スマートフォンを持って走るのは重い。ポケットやランニングポーチの中で揺れるのが気になる。そんな悩みを感じたことはありませんか? 音楽再生に対応したランニングウォッチを使えば、スマートフォンを持たずに、より身軽に走ることができます。 Suunto Runは、ウォッチ本体に音楽を保存できるオフライン音楽機能を搭載したランニングウォッチです。Suunto ...
How to use HRV to optimize your recovery

HRVとは?心拍変動を理解してトレーニングの回復を最適化する方法

「練習しているのになかなか記録が伸びない」「疲れが取れない」と感じたことはありませんか?その原因は、回復の質にあるかもしれません。近年、アスリートから健康意識の高いビジネスパーソンまで幅広い層で注目されているのが HRV(心拍変動) という指標です。 この記事では、HRVとは何か、正常値の考え方、HRVが低いときに体に何が起きているのか、そしてSUUNTOのスマートウォッチを使ってHRVを日...